Project Description
Electrical 3 axis pipe bending machine tube profile bending machine
Machine Feature:
1 set of standard hardened and ground rolls (special steel)
Two lower rolls are fixed. Upper roller is driven by motor and reducer
Portable control panel
Horizontal and Vertical optional
Body constructed of stress-relieved steel
Overload protection on Electrical systems
Bottom rolls hydraulically adjustable with digital readout
NC or CNC can optional by customer
CE certificate
| Parameter | WQJ24-6 | ||
| Profile maximum bending section modulus | 6 | ||
| Rolling speed | 6 | ||
| Profile yield limit(mpa) | △S-250 | ||
| Angle steel inner bending | Maximum section(mm) | 40×5 | |
| Minimum bending diameter(mm) | 800 | ||
| Minimum section(mm) | 20×3 | ||
| Minimum bending diameter(mm) | 400 | ||
| Angle iron outer bending | Maximum section(mm) | 50×5 | |
| Minimum bending diameter(mm) | 800 | ||
| Minimum section(mm) | 20×3 | ||
| Minimum bending diameter(mm) | 400 | ||
| Channel steel outer bending | Channel model(mm) | 8 | |
| Minimum bending diameter(mm) | 600 | ||
| Channel steel inner bending | Channel model(mm) | 8 | |
| Minimum bending diameter(mm) | 700 | ||
| Flat bar flat bending | Maximum section(mm) | 100×18 | |
| Minimum bending diameter(mm) | 600 | ||
| Flat bar vertical bending | Maximum section(mm) | 50×12 | |
| Minimum bending diameter(mm) | 500 | ||
| Round tube bending | Maximum section(mm) | 42×4 | |
| Minimum bending diameter(mm) | 500 | ||
| Round bar bending | Maximum section(mm) | 38 | |
| Minimum bending diameter(mm) | 450 | ||
| Square bar bending | Maximum section(mm) | 45×3 | |
| Minimum bending diameter(mm) | 750 | ||
